Informacje techniczne

BODY WORKS OUTDOOR FITNESS takes care of the safety of users of its equipment to ensure that training with its use is enjoyable, effective, and does not pose a risk of injuries.

Our devices are designed in such a way that they can be safely used by children from the age of 14, youth, and older individuals. They are intended for both experienced fitness enthusiasts and individuals who have never had contact with exercise equipment commonly found in traditional gyms.

DEVICES

  • The supporting structure is made of steel pipes with a diameter of Ø 114 mm and a thickness of 3.6 mm.
  • The mounting crosses are round with a thickness of 8 mm. Other structural elements are made of pipes with a diameter of Ø 60-89 mm and a thickness of 3.0 – 3.2 mm. Handrails and handles are made of steel pipes with a diameter not exceeding Ø 43 mm and a thickness of 3.0 – 3.2 mm. All pipe ends are closed (terminated) with steel caps.
  • Seats, backrests, and steps are made of stainless steel or aluminum sheet with a thickness of 3 mm, with drainage holes for water. Additionally, they are powder-coated with scratch-resistant paint.
  • Moving parts are protected against excessive tilting (above 50 degrees), as well as potential jamming or pinching, by using internal bumper limiters.
  • Reduction of impact force of freely falling elements by using internal shock absorbers that prevent pinching.
  • Distances between individual moving parts are not less than 30 cm, which provides protection against body parts being caught for exercising individuals.
  • Metric galvanized screws, self-locking nuts, galvanized; plastic masking plugs that prevent loosening. Ball bearings, maintenance-free, metric, designed for outdoor use, are used in the joints.
  • The devices are painted with epoxy powder coatings in the system: zinc primer + proper color. Optionally, full galvanizing + powder coating in the Interpon system.

PYLON

  • The supporting structure is made of two steel pipes with a diameter of Ø 89 mm and a thickness of 3.6 mm.
  • The mounting crosses are round with a thickness of 8 mm. Between the pipes, there is an information board measuring 1750/410 mm, made of galvanized sheet metal with a thickness of 1.5 mm. The board contains an exercise instruction infographic, device functions, manufacturer data, etc. Other information and graphical elements of the investor can be placed as well.

INSTALLATION

  • The installation is done on concrete foundations placed at least 30 cm below the ground surface, following the PN-EN 16630:2015-06 standard.
  • The assembly is done using a steel anchor embedded in concrete. The concrete should be certified and at least of class C16/20.

STANDARDS

  • The devices are manufactured in accordance with the PN-EN 16630:2015-06 standards, confirmed by the current certificate. The maximum weight of the exercising person is 120 kg.

WARRANTY

  • Standard manufacturer’s warranty with the possibility of extension up to 60 months.
  • 2 years warranty on: steel load-bearing elements, welds, screws, etc.
  • 2 years warranty on: plastic elements, seats, backrests, steps, as well as bearings, connectors, and rubber or Teflon components.